IMPASOL® STRIPPER products replace mutagenic, reprotoxic, and carcinogenic products, e.g. based on dichloromethane (methylene chloride), NMP, and NEP.
They are designed for the fast and highly efficient removal of all types of paints, varnishes, and coatings. They also remove a wide range of resins (alkyd, acrylic, vinyl, epoxy, polyurethane, polyester, composite, etc.), polymers, vinyls, aminoplasts, acrylic, plastics & adhesives, polyesters, phenols, PU foams & adhesives, one-, two-, and three- component epoxy resins, as well as one- and two- component polyurethanes used in industry.
They are ideal for the highly efficient and economical removal of a wide range of coatings, but they are also designed for two-component systems, composite systems, thermosetting systems, and even systems with UV polymerization!!!
Thanks to their wettability, their optimal evaporation rate, and high KB index, they have a much greater removal capacity than most traditional removers.
They significantly improve safety conditions, economic conditions due to low evaporation loss, and working conditions, due to their very simple application.
| Products | Flash point | Dissolving power | Replaces | |
| STRIPPER 100 | 41°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics | |
| STRIPPER 200 | 23°C | + + + | Dichloromethane, chlorinated thinners, ketones and aromatics | |
| STRIPPER 300 | 32°C | + + + + | Dichloromethane, acetone, alcohols, benzenes, xylenes, MEK and alcohols | |
| STRIPPER 400 | 30°C | + + + | Dichloromethane, chlorinated thinners, ketones and aromatics | |
| STRIPPER 500 | 61°C | + + + | Toluene, diluents, acetones, benzenes, xylenes, MEK | |
| STRIPPER 600 | 92°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics | |
| PUSOLV | 89°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics | |
| PUSTRIP | 62°C | + + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics |
IMPASOL® STRIPPER 100
Extra strong paint, varnish, adhesive, and PU and isocyanate based polymer remover
| Evaporation | 6 hod. |
| KB index | > 300 |
| VOC content | 0,74 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 100 is one of the strongest removers in this series. Designed specifically for diluting, cleaning, and removing paints, resins, polymers & adhesives based on polyurethanes, isocyanates, epoxies, urethane alkyds, acrylics, polyesters, and alkyds. It even removes Komaxit paints. The product is neutral, so it is not necessary to neutralize it, even from aluminium. Cleans polymerized products from dosing, mixing, and production equipment. Suitable for rinsing systems and tanks. The ideal application is soaking, and it works well in ultrasonic baths up to a temperature of 40°C.
VOC (carbon footprint) only 74%.
IMPASOL® STRIPPER 200
Safe alkyd and acrylic remover
| Evaporation | 3 hod. |
| KB index | > 300 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 200 is a safe remover, designed especially for diluting, cleaning, and removing paints, varnishes, resins & adhesives based on epoxies, urethane-alkyds, acrylics, polyesters, and alkyds.
It is ideal for the efficient and economical removal of a wide range of coatings, including graffiti, but also asphalt emulsions. Thanks to its wettability and its optimal evaporation rate, it has greater coverage and penetration than most traditional removers.
IMPASOL® STRIPPER 300
Powerful and fast epoxy remover
| Evaporation | 3 hod. |
| KB index | > 300 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 300 is a strong and fast remover, designed for diluting, cleaning, and removing paints, varnishes, polymers, and adhesives based on one- and two- component epoxy resins, epoxy-urethanes, phenols, one-component polyurethanes, PU epoxies, and polyesters.
Ideal as an OLD PAINT REMOVER. Designed specifically for cleaning brushes, rollers, tools, applicators, and for dipping, spraying, and cleaning stainless steel rollers, engraving printing plates, and roller feeders.
IMPASOL® STRIPPER 400
Fast alkyd, vinyl, and urethane resin remover
| Evaporation | 3 hod. |
| KB index | > 300 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 400 is a fast remover,designed for diluting, cleaning, and removing paints, varnishes, and adhesives based on polyesters, urethanes, alkyds, vinyls, urethane resins, PU epoxies, and one-component polyurethanes (paints, inks, and adhesives).
Ideal for rinsing and cleaning systems and moulds from deposits of composite polyester resins, gels, and paints.
IMPASOL® STRIPPER 500
Absolutely safe paint, varnish, and polymer remover
| Evaporation | 3 hod. |
| KB index | > 300 |
| VOC content | 0,50 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 500 is an absolutely safe, non-flammable remover, designed for safe removal of old paints, varnishes, and adhesives based on acrylic resins, alkyds, alkyd-urethanes, vinyls, aminoplasts, acrylics, polyesters, one- and two- component epoxy resins, and polyurethanes used in the automotive industry.
Ideal for dipping, machine applications, and works well in ultrasonic baths up to 40°C. Thanks to its safety and non-flammability, it significantly improves safety conditions.
Very low VOC (carbon footprint) – only 50%
It has no CLP symbol!
IMPASOL® STRIPPER 600
Non-flammable, extra strong polyurethane and bitumen remover
| Evaporation | 3 hod. |
| KB index | > 300 |
| VOC content | 0,39 |
| Packaging | 5l, 30l and 200l |
IMPASOL STRIPPER 600 is a new generation solvent, based on aprotic dipolar. It is a high-performance and extra strong non-flammable remover of one-component and two- component polyurethanes (PUR, PUD, PU and PIR), acrylic resins, alkyds, vinyls, alkyd- urethanes, aminoplasts, acrylics, polyesters, PVA polyvinyl acetates, and PVC suspensions in plasticizer and bitumen (resins) – plastisol, as well as one and two component epoxy resins.
Immediate excellent replacement for NMP and NEP pyrrolidones, DMF, and DMAc. Ideal for cleaning moulds and tools from polyurethane foam, polymers, polyesters, and epoxy resins. The product is neutral, so it is not necessary to neutralize it, even from aluminium.
Ideal for dipping, machine applications, and works well in ultrasonic baths up to 60°C. Thanks to its safety and non-flammability, it significantly improves safety conditions.
VOC (carbonfootprint) is only 39%, so it is an ideal product for use in the automotive industry.
IMPASOL® PUSOLV
Polyurethane, polyol & isocyanate foam and component (polymers) remover and cleaner
| Evaporation | 2 hod. |
| KB index | > 200 |
| VOC content | 0,39 |
| Packaging | 5l, 30l and 200l |
IMPASOL® PUsolv has been developed as an environmentally friendly, safe, and non-flammable product for the removal of POLYURETHANE, POLYOL, and ISOCYANATE soft and hard foams and polymers. Specifically for the removal of uncured and cured one-, two-, and three-component polyurethanes (PUR, PUD, PU and PIR), polyols, and isocyanates.
IMPASOL® PUsolv is not classified as carcinogenic, mutagenic, or reprotoxic. It can be used immediately as a replacement for NMP, NEP (N ethylpyrrolidone), and also other solvents, such as dimethyl sulfoxide and dipropylene glycol dimethyl ether. Its vapours are not harmful, and it is odourless, and therefore ideal for confined spaces. IMPASOL® PUsolv has no ecological footprint, and a minimal carbon footprint.
IMPASOL® PUsolv is especially recommended for:
- removing layers of mixtures, compounds, polymers, and foams, including cured rinsing and cleaning systems, heads, nozzles, guns and moulds for PU foam production.
- cleaning brushes, rollers, tools, applicators, and trays
- soaking and cleaning stainless steel rollers and roller feeders.
- Washing tanks, as well as mixing and dispensing equipment
- cleaning o aluminium moulds
- no neutralisation required
IMPASOL® PUsolv is neutral, so no neutralization is necessary, even from aluminium. It provides highly effective and economical removal of a wide range of PUR compounds, including use in ultrasonic baths up to 60°C.
IMPASOL® PUsolv significantly improves economic conditions, due to low evaporation loss, as well as working conditions, due to very easy application, and also safety conditions, due to the safety and non-flammability of the product.
It has a much higher coverage than most strippers, due to its WETTABILITY, surface tension, and its optimum evaporation rate.
IMPASOL® PUSTRIP
Extra strong remover and cleaner of polyurethane, polyol and isocyanate foams and components (polymers)
| Evaporation | 2 hod. |
| KB index | > 500 |
| VOC content | 0,39 |
| Packaging | 5l, 30l |
IMPASOL® PUstrip is developed as a very strong and at the same time environmentally friendly, safe and non-flammable product for the removal of POLYURETHANE, POLYOL AND ISOCYANATE soft and hard foams or polymers. Specifically for the removal of uncured and cured single, two and three component polyurethanes (PUR, PUD, PU and PIR), polyols and isocyanates.
IMPASOL® PUstrip is not classified as a carcinogenic, mutagenic or reprotoxic substance. It can be used immediately as a DIRECT replacement for NMP, NEP (N ethylpyrrolidone) or other solvents such as dimethyl sulfoxide and dipropylene glycol dimethyl ether. Its vapours are not harmful and odourless, ideal for confined spaces. IMPASOL® PUstrip has no ecological footprint and a minimal carbon footprint.
IMPASOL® PUstrip is recommended especially for:
- Removal of layers of mixtures, compounds, polymers and foams, even cured.
- Flushing and cleaning of systems, heads, nozzles, guns and moulds for PU foams.
- Cleaning of brushes, rollers, tools, applicators and trays.
- Soaking and cleaning of stainless steel rollers and roller feeders.
- Washing of tanks, tanks, mixing and dosing equipment.
- Cleaning of aluminium moulds – no neutralization required.
- Cleaning in ultrasonic and washing equipment.
IMPASOL® PUstrip is neutral, it does not need to be neutralised, even from aluminium. It provides highly effective and economical removal of a wide range of PUR and ISO compounds, including use in ultrasonic washers up to 40°C.
IMPASOL® PUstrip significantly improves economic conditions due to low evaporation loss, working conditions due to very easy application and also safety conditions due to the safety (vapours are not dangerous) and non-flammability of the product.
It has a much greater hiding power than most removers due to its STRENGTH, surface tension and its optimum evaporation rate.