The IMPASOL® SOLVENT series has been developed for the fast and highly efficient removal of all types of paints, varnishes, and coatings.
Products in this line also remove a wide range of resins (acrylic, vinyl, epoxy, ester, polyurethane, polyester, composite resins, etc.), as well as vinyls, aminoplasts, acrylicplastics & adhesives, polyesters, phenols, PU foams & adhesives, one- two- and three-component epoxy resins, and even one- and two-component polyurethanes used in industry.
They are ideal for the highly efficient and economical removal of a wide range of coatings, but are also suitable for two-component systems, composite systems, thermosetting systems, and even UV polymerization systems.
They are biodegradable, significantly improve safety and working conditions, and protect the environment. By using them, you avoid using toxic, dangerous, and flammable solvents.
| Products | Evaporation | Dissolving power | Flash point | Replaces |
| SOLVENT S 10 | 10 min | + + + + + | 90°C | Petrols, thinners, aromatics |
| SOLVENT S 20 | 3 min | + + + + | 25°C | Acetone, chlorinated solvents/thinners, petrols, and aromatics |
| SOLVENT S 25 | 15 min | + + + | 40°C | Acetone, chlorinated diluents, gasolines and aromatics |
| SOLVENT S 30 | 5 min | + + | 35°C | Acetone, alcohols, petrols, xylenes, MEK, and spirits |
| SOLVENT S 60 | 60 min | + + + + | 60°C | Dichloromethane, ketones, acetones, and aromatics |
| SOLVENT S 70 | 8-10 min | + + + + | 42°C | Dichloromethane, ketones, acetones, and aromatics |
| SOLVENT S 80 | 150 min | + + + | 74°C | Dichloromethane, chlorinated solvents/thinners, petrols, and aromatics |
| SOLVENT S 90 | 6 hodin | + + + + + | 50°C | Dichloromethane, chlorinated solvents/thinners, petrols, and aromatics |
| SOLVENT S 95 GEL | 6 hodin | + + + + + | 50°C | Dichloromethane, chlorinated solvents/thinners, petrols, and aromatics |
| SOLVENT SR | 10 min | + + + | 25°C | Acetone, chlorinated solvents/thinners, petrols, and aromatics |
IMPASOL® SOLVENT S10
Non-flammable PU, PUR, PUD and PIR remover
| Evaporation | 10 min. |
| KB index | >200 |
| VOC content | 0,07 |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S10 is ideal for the universal removal of resins and PU on any basis (PU, PUR, PUD, and PIR), and its products (paints, inks, and adhesives).
It ensures the highly efficient and economical removal of a wide range of coatings, one-component systems, thermosetting systems, and even systems with PUR and PIR polymerization before the end of polymerization.
It removes and degreases mineral, vegetable, and animal lubricants, oils, preservative oils & waxes, adhesives, inks, paints, sealants, silicones, and difficult-to-remove impurities (fuel oil, tar). Can be diluted with water. It works well in ultrasonic baths up to 60°C. Can be used as a safe replacement for petrol cleaners, solvents, and acetone.
Significantly reduces the carbon footprint, VOC content only 7%!!
IMPASOL® SOLVENT S20
Quick epoxy and urethane remover
| Evaporation | 2 – 3 min. |
| KB index | Immeasurable |
| Packaging | 5l, 30l and 200l |
IMPASOL® SOLVENT S 20 is developed as an immediate replacement for acetone to remove paints, varnishes, inks and adhesives used in manufacturing. It is ideal for the universal removal of resins of any base and products made from them (paints, inks, adhesives).
Designed to remove a wide variety of coatings, one-part systems, heat curable systems and even UV polymerized systems in a highly effective and economical manner, it cleans most inks, paints, varnishes, resins and adhesives before the end of polymerization. By using this product you avoid toxic, carcinogenic and flammable thinners. The product does not fall into the ATEX zone, it is not CMR. Significantly improves safety conditions.
ADVANTAGES:
- Cold cleaner
- Extra fast evaporation
- Anti-corrosive
- Guaranteed free of toxic, carcinogenic and poisonous substances
- Biodegradable
- Extreme removal power
- Unique surface tension
- Residue-free degreaser
IMPASOL® SOLVENT S25
Quick epoxy and urethane remover
| Evaporation | 17 min. |
| KB index | 160 |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S25 has been developed as a fast degreasing solvent for paints, varnishes, polymers & adhesives based on epoxies, urethanes, polyurethanes, urethane-alkyds, polyesters, vinyls. It also very effectively removes resins used in paints, inks, varnishes, and adhesives (it removes adhesives from tapes effectively).
Its dissolving power also removes pigments of a wide range of colours. Allows fast colour changes without a residual spectrum. Ideal for cleaning mixers, robots, paint guns, inks, and adhesives.
IMPASOL® SOLVENT S30
Cellulose paint, varnish, and adhesive remover
| Evaporation | 5 min. |
| KB index | 160 |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S30 is an extra fast degreasing solvent, designed especially for cellulose. It replaces diluents based on acetone, isopropyl alcohol, xylene, and MEK mixtures. It can be diluted with water.
Designed for the fast and safe removal and degreasing of impurities and dilution of cellulose products (paints, inks, adhesives). It is very effective on water-soluble systems, PVA, hydroxalkyl & carboxyalkyl celluloses, cellulose acetates, and nitrocelluloses. It highly effectively removes a wide range of coatings, one-component systems, and heat-cured PVA systems. It is characterized by very fast evaporation. The product can be rinsed with hot and cold water under both low and high pressure, thereby reducing costs.
IMPASOL® SOLVENT S60
Non-flammable solvent for flushing systems
| Evaporation | 59 min. |
| KB index | immeasurable |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S60 is designed to remove paints, varnishes, inks & adhesives based on resins, and polyurethanes used in the production of mixing and dosing systems, as well and tanks that are connected to each other.
This significantly reduces waste. It is adapted for cleaning with a spray, or in a rinsing cleaning machine.
Due to the slow evaporation, there are minimal evaporation losses. It works well in ultrasonic baths up to a temperature of 40°C.
IMPASOL® SOLVENT S70
Universal extra fast paint, varnish, ink, resin, and adhesive remover
| Evaporation | 9 min. |
| KB index | immeasurable |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S70 is a universal technical paint, varnish, ink, and adhesive remover used in production. Designed for removing resins and urethanes on any base, as well as its products (paints, inks, adhesives).
It replaces technical petrol, ketones, acetone, and other aromatic-based solvents. It effectively removes a wide range of coatings, one-component systems, thermosetting systems, and even UV polymerization systems before the end of polymerisation.
IMPASOL® SOLVENT S80
Absolutely safe non-flammable paint, varnish, adhesive, and polymer remover
| Evaporation | 150 min. |
| KB index | immeasurable |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S80 is an extra strong, non-flammable, absolutely safe liquid, removing non-cross linked polymers, paints, varnishes, adhesives, and inks. It enables the elimination of residual traces of polymers on screws during extrusion, but also on moulds, machines, and their parts.
Efficient, safe, and economical removal of a wide range of coatings, contact adhesives, heat-curable systems, and even UV polymerization. Due to the long evaporation time, it is ideal where it is necessary to let the product act for a long time without a loss through evaporation. It minimizes evaporation losses. It can be diluted with water. It works well in ultrasonic baths up to 60°C.
IMPASOL® SOLVENT S90
Extra strong, wide spectrum remover
| Evaporation | 6 hod. |
| KB index | > 300 |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S90 is the strongest remover in this series, and can be used as a substitute for dichloromethane and its products. Designed specifically to remove thick layers of resins, vinyls, aminoplasts, polyesters, phenols, one- and two- component epoxy resins & polyurethanes (PUR, PUD and PIR), PU foams, powder coatings, and other special coatings used in industry.
Due to the long evaporation time, it is ideal where the product needs to act for a long time without loss through evaporation. The product can be rinsed with water under low pressure, thereby reducing costs. It works well in ultrasonic baths up to a temperature of 40°C.
IMPASOL® SOLVENT S95 GEL
Extra strong, wide-spectrum gel remover
| Evaporation | 6 hod. |
| KB index | > 300 |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT S95 GEL is a gel version of the S90 product, providing a substitute for dichloromethane and its products.
This product allows you to reduce the amount used by up to 40%, compared to conventional products. The product can be rinsed with water under low pressure, thereby reducing costs. Thanks to its gel form and long evaporation time, it is suitable for vertical applications with a long exposure time.
IMPASOL® SOLVENT SR
PU, epoxy paint, varnish, and adhesive remover
| Evaporation | 10 min. |
| KB index | immeasurable |
| Packaging | 5l, 30l and 200l |
IMPASOL SOLVENT SR is designed for the removal of polyurethane, urethane, polyester, alkyds, and vinyl resins, which bind to each other, and thereby greatly reduces waste. The product does not absorb dyes from resins, and thanks to its self-cleaning properties, it can be used several times.
Can be used as a replacement for ketone, dichloromethane, acetates, and aromatics to remove and dissolve inks. It is characterized by its unique cleaning and dissolving power and low odour.
IMPASOL SOLVENT SR evaporates very quickly, and so there is no slowdown in work during re-commissioning. It is adapted for cleaning with a spray or in a rinsing cleaning machine.