Products | Method of application | Application for | |||||||||||||
Wiping | Painting | Soaking | Spraying | High-pressure spraying | Ultrasound | Lubricants | Oils | Cutting oils | Protective oils | Plant oils | Waxes | Bitumen | Paints and inks | Mineral deposits | |
* * * | * * | * | * * * | * * * (FOAMING) | | * | */ | | * | * * | * | | * | | |
| | | | | | | | | | | | | | | |
* * * | * * | * | * * * | * | * * | * | * | | * | * * | * | | * | / | |
| | | | | | | | | | | | | | |
Products | Method of application | Application for | |||||||||||||
Wiping | Painting | Soaking | Spraying | High-pressure spraying | Ultrasound | Lubricants | Oils | Cutting oils | Protective oils | Plant oils | Waxes | Bitumen | Paints and inks | Mineral deposits | |
| | | | | | | | | | | | | | | |
* * * | * * * | * * | * * * | * | * | * * / | * */ | * * / | * * / | * * / | * * | * | * * / | | |
* | * | * * | * * * | * * * * * | * | * * / | * * / | * * / | * * / | * * / | * * | * | * * / | | |
* * * | * * * | * * | * * * | * | * | * * * | * * * | * * * | * * * | * * * | * * | * | * * / | | |
| | | | | | | | | | | | | | | |
* * * | * * * | * * | * * * | * | * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | | |
* * * | * * * * * | * | * | | | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | * * * * * | | |
| | | | | | | | | | | | | | |
Products | Method of application | Application for | ||||||||||||||
Wiping | Painting | Soaking | Spraying | High-pressure spraying | Ultrasound | Lubricants | Oils | Cutting oils | Protective oils | Plant oils | Waxes | Bitumen | Paints and inks | Mineral deposits | ||
* * | * * | * * | * * | | | * | * | * | * | * | | | | * * * * * | ||
| | | | | | | | | | | | | | | ||
| | | | | | | | | | | | | | |
Products | Method of application | Application for | |||||||||||||
Wiping | Painting | Soaking | Spraying | High-pressure spraying | Ultrasound | Lubricants | Oils | Cutting oils | Protective oils | Plant oils | Waxes | Bitumen | Paints and inks | Mineral deposits | |
* * | * * | * * | * * | * | * | * | * | * | * | * | | | | * * * * * | |
| | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | |
Products | Method of application | Application for | ||||||||||||||
Wiping | Painting | Soaking | Spraying | High-pressure spraying | Ultrasound | Lubricants | Oils | Cutting oils | Protective oils | Plant oils | Waxes | Bitumen | Paints and inks | Mineral deposits | ||
* * * | * * * | * | * * * | * * * | | * * / | * * / | * * / | * * / | * * / | * * | * | * | | ||
| | | | | | | | | | | | | | |
Citrus-based microemulsion solvents:
They combine high efficiency with surface friendliness. Their composition makes them very suitable for regular cleaning and cleaning in less dirty areas. Ideal for Work surfaces, tools, technical equipment, working environments, complete maintenance of office areas.
IMPACLEAN® Aqua A 120
Frequency cleaners
Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
A non-flammable, non-toxic, surface-friendly cleaning concentrate that has a wide range of applications as a frequency cleaner.
It is designed for cleaning machines, structures, moulds, jigs, glass and work surfaces, floors and walls of grease and dirt.
It removes biological dirt, animal and vegetable fats and oils, stuck on dirt such as insects on glass and waxes from all water washable hard surfaces (tiles, metals, stainless steel, glass, tiles, enamel surfaces).
The product can be used in high pressure cleaners with foam nozzles.
Also suitable for ultrasonic cleaners up to 80°C.
Technical data sheet
IMPACLEAN® Aqua A 122
Foam cleaner
Ultra Concentrate
Packaging | 5 Kg, 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, surface-friendly, extra strong anti-static cleaning ultra-concentrate, with a very pleasant eucalyptus scent.
Removes biological dirt, animal and vegetable fats and oils and waxes from all water washable hard surfaces (tiles, metals, stainless steel, glass, tiles, enamel surfaces).
It is designed for routine cleaning of walls, floors, machinery and equipment, windows, upholstery, hardware, work surfaces, signs, skeletons and other hard surfaces. It removes dirt from masonry, glazed tiles, stone and marble very well. Produces a rich, auto-active foam.
Does not damage seals, NBR and silicone O-rings, rubber and most plastics.
Product can be used in high pressure cleaners with foam nozzle.
Ideal for cleaning PVC floors, to achieve a high gloss finish.
Technical data sheet
IMPACLEAN® Aqua A 150
Cleaner with protective coating
Packaging | 5 Kg, 20 Kg, 6*20 Kg and 220 Kg |
The product is made on the basis of bio-plant derivatives in the form of nanoemulsion. It is non-flammable, non-toxic, gentle and suitable for regular cleaning of less dirty surfaces.
Ideal for cleaning work surfaces, tools, technical equipment, optics, electronics, LCD, etc. Suitable for glass, sensitive plastics, stainless steel, polycarbonate, etc. Great for residue-free cleaning, leaves no streaks. It has high hydrophobicity with retraction and restores shine to the treated surface.
It cleans the surface and then protects it against fogging, soiling and in most cases calcium and mineral deposits.
It is designed for manual cleaning. Also suitable for ultrasonic cleaners up to 80°C.
It is absolutely safe and bears the BIO label.
Technical data sheet
IMPACLEAN® Aqua A 160
Strong cleaner with protective coating
Packaging | 5 Kg, 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, powerful cleaner and protection for hard materials (e.g. plastics, stainless steel, enamel, sensitive synthetic materials, polycarbonates, Plexiglas, etc.).
Ideal for degreasing painted and varnished surfaces. Excellent at removing stuck-on dirt, grease, animal, vegetable and mineral oils and biological contaminants.
It cleans and subsequently protects the surface against fogging, soiling and in most cases against the formation of calcareous and mineral deposits. It restores shine to the treated surface and its hydrophobic effect greatly facilitates subsequent cleaning.
Also suitable for ultrasonic washers up to 80°C.
The product is designed for manual cleaning.
Technical data sheet
This IMPACLEAN AQUA® range represents newly developed products replacing carcinogenic, toxic, mutagenic and flammable products.
They are designed for fast and highly effective degreasing and removal of grease and dirt from metals, plastics, rubbers, elastomers, paints, varnishes and coatings. Specially formulated to remove oils, petrolatum, grease, carbonised substances, waxes, resins, tar, as well as paints, varnishes, etc., used in industry.
Due to their wettability, optimum evaporation rate and ease of application, they have a much greater degreasing capacity than most traditional products.
Their use avoids toxic, carcinogenic (H340, 341, 350, 351, 360, 361, 362, 370, 371, 372, 373), extremely flammable (H224, 225) and explosive (H203, 205) thinners.
They significantly improve economic, working and safety conditions.
They are anti-corrosive and biodegradable.
IMPACLEAN® Aqua B 202
Workshop cleaner and degreaser with active foam
Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, powerful cleaner and degreaser with active foam, gentle on the surface.
Designed for cleaning machines, engines, structures, chassis, moulds, products, jigs, work surfaces, windows, floors, walls and tools of oils, greases, lubricants and dirt. It also removes dirt from masonry, glazed tiles, stone, marble and concrete parts.
Ideal for degreasing surfaces before painting and for washing machinery and products after machining, welding and finishing operations. Removes dirt from all water washable hard surfaces (tiles, metals, stainless steel, glass, tiles, enamel surfaces).
Replaces flammable, toxic, hazardous, corrosive, chlorinated hydrocarbons such as gasoline, thinners and flammable degreasers. Does not damage gaskets, NBR and silicone O-rings, rubber or most plastics.
The product is designed for manual and spray cleaning.
Also suitable for ultrasonic washers up to 80°C.
Technical data sheet
IMPACLEAN® Aqua B 204
Strong cleaner and degreaser with active foam
Strong concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, strong cleaner and degreaser with active foam – a stronger version of B202.
Replaces flammable, toxic, hazardous, corrosive, chlorinated hydrocarbons such as gasoline, thinners and flammable degreasers.
The product is designed for manual, spray and high pressure cleaning.
Also suitable for ultrasonic cleaners up to 80°C.
Technical data sheet
IMPACLEAN® Aqua B 205
Extra strong low foaming degreaser for spray, portal, floor and high pressure equipment
Ultra Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, extra strong, low foaming cleaner and degreaser in ultra-concentrate. Depending on the chosen dilution (1:100 to 1:500), it can be used on all water-resistant surfaces, for cleaning metals, aluminium, stainless steel, tiles, sails, painted and painted surfaces, ceramics and glass.
In the engineering and automotive industries, it is intended for cleaning machines, engines, products, structures, chassis, moulds, jigs, work surfaces, floors, walls and tools of oils, grease and dirt. Ideal for washing machinery and products after machining, welding and final work activities.
Replaces flammable, toxic, hazardous, chlorinated hydrocarbons such as gasoline, thinners and flammable degreasers.
The product is designed for spray, gantry, floor and high pressure equipment.
Also suitable for ultrasonic cleaners up to 80°C.
IMPACLEAN® Aqua B 220
Extra strong degreaser with auto-active foam for most surfaces
Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, extra strong degreaser with auto-active foam for most surfaces. Designed for difficult to remove contaminants, e.g. petroleum products, residues from burning or combustion.
The product is designed for use in the engineering and automotive industries to wash machines, engines, products, structures, conveyor chains, chassis, moulds, jigs, work surfaces, floors, walls and tools of preservative, mineral and synthetic oils, greases, petroleum jelly and other greasy soils.
It is also excellent at removing asphalt and tar. Ideal for washing machinery and products after machining and welding and final work activities. Also removes dirt from masonry, glazed tiles, stone, marble and concrete parts.
Replaces flammable, toxic, hazardous, chlorinated hydrocarbons such as gasoline, thinners, toluene and flammable degreasers.
The product is designed for manual, spray and high pressure cleaning.
Also suitable for ultrasonic cleaners up to 80°C.
IMPACLEAN® Aqua B 230
Ultra powerful “solvent” degreaser and dirt remover
Ultra Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Special non-flammable, non-toxic, ultra strong degreaser, containing non-flammable and safe IMPASOL diluents.
This is a stronger version of Impaclean Aqua B 220. The product is intended for use in the engineering and automotive industries for cleaning machines, engines, products, structures, conveyor chains, chassis, moulds, jigs, work surfaces, floors, walls and tools of oils, vaselines, waxes and other contaminants. Ideal for cleaning machinery and products after machining and welding, also for difficult to remove contaminants such as petroleum products, residues from burning or incineration.
Degreases and removes mineral and synthetic fats and oils, built-up dirt, waxes, baked-on dirt and silicone petroleum jelly from all water-washable hard surfaces (tiles, metals, stainless steel, glass, tiles, enamel surfaces).
Replaces flammable, toxic, hazardous, chlorinated hydrocarbons such as gasoline, thinners, toluene and flammable degreasers.
Also suitable for ultrasonic cleaners up to 80°C.
IMPACLEAN® Aqua B 300
Ultra powerful odourless degreaser and dirt remover
Ultra concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, odourless, ultra strong degreaser and dirt remover. Highly alkaline, diluent-free product.
It is characterized by a high proportion of extra active ingredients. Designed specifically for cleaning extremely dirty surfaces. This is a stronger version of Impaclean Aqua B 230.
Replaces flammable, toxic, hazardous, chlorinated hydrocarbons such as gasoline, thinners, toluene and flammable degreasers.
Also suitable for ultrasonic cleaners up to 80°C.
IMPACLEAN® Aqua B 330 GEL
Extra strong degreaser and dirt remover
Concentrate
Packaging | 25 Kg, 4*25 Kg and 8*25 Kg |
A non-flammable, non-toxic, ultra strong alkaline gel degreaser and soil remover with an extended time of action of up to 12 hours. Especially for cleaning extremely dirty surfaces.
The product is designed for use in the engineering and automotive industries for cleaning machines, engines, structures, conveyor chains, chassis, moulds, jigs, work surfaces, floors, walls, products and tools. Ideal for cleaning machinery and products after machining, welding and final work activities.
Degreases and removes mineral and synthetic fats and oils, built up dirt, waxes, baked on dirt, burns, grease, petroleum products, rubber and silicone petroleum jelly from all water washable hard surfaces (tiles, metals, stainless steel, glass, tiles, enamel surfaces, etc). Ideal for degreasing hot and warm surfaces and vertical surfaces due to its gel consistency.
Replaces flammable, toxic, hazardous, chlorinated hydrocarbons such as gasoline, thinners, toluene and flammable degreasers.
Technical data sheet
IMPACLEAN® Aqua stripper GEL
Remover of old coatings, paints, varnishes and adhesives
Packaging | 25 Kg, 4*25 Kg and 8*25 Kg |
A non-flammable, solvent-free, extra strength remover, replacing carcinogenic, toxic and flammable solvent products.
Designed to remove old coatings I thick coats, oil and glycerophthalate paints, wax or zinc and lead white based finishes, epoxy paints and rust protective coatings. If used in large enough quantities, it can remove several coats of paint at once. Significantly improves economic conditions due to low evaporation loss, working conditions due to very easy application and safety conditions due to the fact that no hazardous fumes are produced during its use.
It has a much higher hiding power than most traditional degreasers due to its wetting power and its optimum evaporation rate. Unlike organic solvent-based strippers, which work by penetrating the paint, softening it and swelling it, this product loosens the paint and turns it into a water-thinnable mass.
The product is not volatile and can last for any length of time. Ideal for enclosed proctors, as there is no risk of explosion or fire when working with it. Does not contain methyl chloride (dichloromethane).
Technical data sheet
Quickly, very effectively remove limescale, calcium, cement and mineral deposits, rust and minerals. Extra strong cleaning concentrates for use in heating plants and heating systems, heat exchangers, baths, colonnades, water treatment plants, etc.
They are of great use in engineering for cleaning machines, pumps, pipes, products, structures, moulds, jigs, work surfaces, floors, walls and tools. They clean rust, algae, oxidized surfaces, lime and mineral deposits from all water washable surfaces (tiles, metals, stainless steel, aluminum, glass, tiles, enamel surfaces).
IMPACLEAN® Aqua C 304
Remover of waterstone, Lime and mineral scale and water rust
Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
It is a non-flammable, non-toxic, extra strong cleaning concentrate for use in heating and cooling systems, heat exchangers, baths, colonnades, swimming pools, water storage and water systems, cooling towers, water tanks and reservoirs, water treatment plants, etc.
Designed for cleaning machines, pumps, structures, moulds, templates, work surfaces, floors and walls. Cleans algae, oxidized surfaces, lime and mineral deposits from all water washable surfaces (tiles, metals, tiles, enamel surfaces). Uniquely removes water rust.
Not recommended for stainless steel, aluminium, copper and their alloys, here we recommend Impaclean Aqua C310 or C 318.
Technical data sheet
IMPACLEAN® Aqua C 310
Strong remover of waterstone, calcium and mineral soils, steel and aluminium stainless
Concentrate
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, safe, powerful cleaner of mineral and calcium deposits, rust and oxidation from all water-washable surfaces (glazed tiles, non-ferrous metals /must be tested!!!/, stainless steel, aluminium, tiles, enamel surfaces). Effectively removes residues of building materials such as Portland cement, lime, concrete, mortar, plaster, brick dirt, etc. Removes dirt from masonry, glazed tiles, stone and concrete.
Designed for use in heating and cooling systems, heat exchangers, spas, colonnades, swimming pools, spas, water tanks, water systems, cooling towers, tanks, water treatment plants, etc.
Designed for cleaning machines, pumps, structures, moulds, jigs, work surfaces and wherever acid cleaners cannot be used due to damage to stainless steel and aluminium. C310 can be used for indoor and outdoor applications. It will not damage gaskets, NBR and silicone “O” rings, rubber or most plastics.
Also suitable for ultrasonic cleaners up to 80°C.
Technical data sheet
IMPACLEAN® Aqua C 318
Extra strong remover of waterstone, calcium and mineral deposits
Concentrate – gel
Packaging | 20 Kg, 6*20 Kg and 220 Kg |
Non-flammable, non-toxic, safe, extra strong cleaner of mineral and calcium deposits, rust and oxidation from all water washable surfaces (glazed tiles, non-ferrous metals /must be tested!!!/, stainless steel, aluminium, tiles, enamel surfaces).
It is a stronger version of Impaclean Aqua C310 and also removes sanyther, salt crusts of mineral deposits (manganese, salt, iron and chlorine).
Also suitable for ultrasonic washers up to 80°C.
Technical data sheet
Cold phosphating degreasers, cold phosphating, rust removers, transformers and converters.
IMPACLEAN® Aqua C 316
Rinseless phosphate cut-off
Ultra concentrate
Packaging | 5l, 20l a 200l |
AQUA C 316 is an effective rinse-free phosphate remover and PRIMER with a phosphatizing and cleaning effect. It is ideal for cleaning and passivating rust on rusted surfaces, and acts as a PRIMER on freshly galvanized metal structures, components, etc. Designed to provide rinse-free phosphate stopping while converting rust and to increase paint adhesion and extend paint life.
Freshly galvanized surfaces treated with AQUA C 316 can be painted without the use of additional primer. The protective coating by phosphating reinforces the defences of other metals (iron, cast iron) against subsequent corrosion at the same time as subsequent surface treatments or coatings.
AQUA C 316 replaces toxic, corrosive and harmful products. It provides highly effective and economical protection on surfaces such as steel roofs, structures, protective parts, skeleton parts, industrial parts, car bodies and chassis, etc. It is used on all ferrous metals – steel, iron, galvanized steel. Provides more effective protection than conventional rust removal and priming. Ideal for high pressure applications.
IMPASOL® HCA-C
Degreasing, stripping and passivating fluid
Packaging | 5l, 20l a 200l |
HCA-C is a liquid containing organic PHOSPHATE components to bind rust in such a way that it stops corrosion, simultaneously degreases without residue and forms a protective PRIMER coating. Thus, corrosion is chemically stopped and the protective coating formed also strengthens the defenses of other metals (iron, cast iron) against subsequent corrosion due to cold phosphating.
Freshly galvanized surfaces treated with this product can be painted without the use of additional primer or reaction paint. Significantly extends the life of paints applied to the treated surface.
HCA-C is a safe, non-flammable, degreaser, replacing gasolines and solvents. Removes dirt, oils, lubricants, designed specifically for surface preparation prior to further application. Provides highly effective and economical protection on surfaces such as steel roofs, structures, protective parts, skeletal parts, industrial parts, automotive bodies and chassis, etc. It is used on all ferrous metals – steel, iron, galvanized steel. Designed for manual, low and medium pressure cold applications.
Safe product without CLP symbols.
IMPACLEAN® Aqua C 320
Degreasing, stripping and phosphate primer
Ultra concentrate
Packaging | 5l, 20l a 200l |
AQUA C 320 is a clear liquid containing organic ingredients to bind rust and phosphate so that it immediately stops corrosion while degreasing and creating a protective phosphating coating. The phosphate primer is designed for wet sandblasting for perfect cleaning, degreasing, instant rust passivation even on rusted surfaces.
It instantly forms a phosphate coating on the surface and immediately protects against the formation of corrosion (oxidation). Ensures extended service life and increased paint adhesion without risk of corrosion after sandblasting.
The protective phosphate coating, together with subsequent surface treatments or coatings, reinforces the defences of other metals (iron, cast iron) against subsequent corrosion.
It provides highly effective and economical protection on surfaces such as steel roofs, structures, protective parts, skeleton parts, industrial parts, car bodies and chassis, etc.
It is used on all ferrous metals – steel, iron, galvanized steel.
Technical data sheet
Powerful industrial cleaners with special nanoWAX Impaguard wax and auto-active foam are ideal for cleaning and protection at the same time ( one application )..
IMPACLEAN® Aqua D 430
Strong cleaner and remover with autoactive foam and nanovocarbon – IMPAGUARD
Cooncentrate
Packaging | 5 Kg, 20 Kg and 6*20 Kg |
Non-flammable, non-toxic, very strong cleaner with a special IMPAGUARD nano-coating that perfectly cleans the surface and protects it for a long time.
Designed for cleaning surfaces that are subjected to heavy loads (dust, contamination with alkaline and acidic solutions, UV radiation, etc.).
The product also protects against corrosion and weathering. Designed for all types of paintwork in the engineering and automotive industry, for washing machines, skeletons, products, structures, parts, moulds, jigs, work surfaces, etc. Ideal for washing car bodies, trains, trolleybuses and trams.
It is highly effective even at high dilution, guaranteeing a reduction in operating costs.
Technical data sheet
IMPACLEAN® Aqua D 440
High pressure, low foam, strong cleaner and degreaser with protective nano-coating IMPAGUARD
Ultra Concentrate
Packaging | 5 Kg, 20 Kg and 6*20 Kg |
Non-flammable, non-toxic, very strong cleaner with a special IMPAGUARD nano-coating that perfectly cleans the surface, restores dull surfaces and protects them for a long time.
Creates a metallic shine with an anti-static film. Specially designed for medium and high pressure washing and for washing in dishwashers (including gantry washers).
Designed for cleaning surfaces that are subjected to heavy loads (dust, grease, contamination with alkaline and acidic solutions, UV radiation, etc.). It also cleans biological dirt (insects), animal and vegetable fats and oils, waxes from all water washable surfaces (paint, metals, stainless steel, aluminium and its alloys, tarpaulins, plastics and special surfaces – e.g. carbon, advertising stickers, etc.).
The product also protects against corrosion and weathering. Designed for all types of paintwork in the engineering and automotive industries, for washing machines, skeletons, products, structures, parts, moulds, templates, work surfaces, etc. Ideal for washing car bodies, trains, buses, trolleybuses, trams (including “graphite fallout from trolleys) and trolleybuses.
It is highly effective even at high dilution of 0.5-1%, guaranteeing a reduction in operating costs.
Designed for medium, high pressure and gantry washing.
Also suitable for ultrasonic washers up to 40°C.
Technical data sheet
ORANGESOLVE products are blends of highly active micro-emulsion premium citrus oils, detergents and surfactants designed to remove grease, oils, fats, tar, asphalt, silicones, old lubricants and water-based paints and inks.
ORANGESOLVE®
Širokospektrální mikroemulzní rozpouštědlo na bázi citrusů
Koncentrát
Vůně | příjemná, citrusová |
Ph | 9,3 |
Báze | mikroemulze |
Balení | 20 Kg, a 220 Kg |
ORANGESOLVE je směs vysoce aktivních mikroemulzních prvotřídních citrusových olejů, detergentů a povrchově aktivních činidel, určených na odstranění mastnot, olejů, tuků, dehtu, asfaltu, silikonů, starých maziv a vodou ředitelných barev a inkoustů.
Použitelný na kovech, hliníku, nerez oceli, skle, keramice, plastech, barevných kovech, litině, kamenných,
smaltovaných, dřevěných, gumových a barvených površích. Používá se k čištění nástrojů, strojů, motorů, skeletů, konstrukcí, nádrží, pracovních ploch, atd. Produkt lze použít na všechny voděodolné povrchy. V poměru ředění až 1:20 s vodou (teplou i studenou) je zachována unikátní čistící přírodní síla.
Tento unikátní přírodní mikročistič zcela nahrazuje jakékoliv hořlavé, toxické, zdraví škodlivé, dráždivé a chlorované uhlovodíky jako jsou např. benzín, ředidla, hořlavé odmašťovače.
Technický list
Reference | ||
ORANGESOLVE je atestovaný podle nejpřísnějších mezinárodních testů a je používán těmito významnými firmami. | ||
FIRMA | APLIKACE | VÝSLEDEK |
AMS 1526B | Čištění exteriérových povrchů v letadle | Vynikající |
BOEING D6 – 17487 | Čištění exteriérových povrchů v letadle | Vynikající |
McDonnell Douglas – CSD 1 | Čištění exteriérových povrchů v letadle | Vynikající |
CORE LABORATORIES EPA | Čištění jedovatých těžkých kovů | Zatříděný jako bezpečný |
Metoda aplikace | ||||||
Setřením | Natíráním | Máčením | Stříkáním | Vysokotlakým stříkáním/pění/ | Strojově | Ultrazvukem |
¨ ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ | ¨ ¨ ¨ ¨ |
ORANGESOLVE® CRYSTAL GLASS
Výkonné mikroemulzní rozpouštědlo na bázi citrusů
Vůně | příjemná, citrusová |
Ph | 7,3 |
Báze | mikroemulze |
Balení | 5 Kg, 20 Kg a 220 Kg |
ORANGESOLVE CRYSTAL GLASS je směs vysoce aktivních mikroemulzních prvotřídních citrusových olejů, detergentů a povrchově aktivních činidel, určených na odstranění mastnoty, oleje, tuků a nečistot z tvrdých povrchů, skla a speciálních citlivých plastů bez změny lomu světla (nezanechává šmouhy).
Odstraňuje tuky, oleje, maziva a nevytvrzené vodou ředitelné barvy a inkousty.
Použitelný na mnoha citlivých površích používaných v elektronickém a optickém průmyslu – vzácných kovech, kompozitních materiálech, skle, keramice a většině plastů a elastomerů.
Používá se k čištění obrazovek, monitorů, LCD displejů, skel skenerů, kopírovacích, promítacích a tiskařských strojů, senzorů, snímačů a optických zařízení – kamer, snímacích, měřících a detekovacích zařízení, průzorových skel a plastů na skeletech strojů.
Tento unikátní přírodní mikročistič zcela nahrazuje jakékoliv hořlavé, toxické, dráždivé a chlorované uhlovodíky jako např. alkohol, benzín, ředidla a hořlavé odmašťovače.
Neohrožuje přírodu a zajišťuje absolutně bezpečné pracovní prostředí.
Neohrožuje zdraví vdechováním nebezpečných látek, nedráždí kůži.
Technický list
Metoda aplikace | ||||||
Setřením | Natíráním | Máčením | Stříkáním | Vysokotlakým stříkáním/pění/ | Strojově | Ultrazvukem |
¨ ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ ¨ | ¨ ¨ ¨ | ¨ ¨ |