IMPASOL® STRIPPER products replace mutagenic, reprotoxic and carcinogenic products, eg. based on dichloromethane (methylene chloride), NMP and NEP.
They are designed for fast and highly efficient removal of all types of paints, varnishes and coatings. They also remove a wide range of resins (alkyd, acrylic, vinyl, epoxy, polyurethane, polyester, composite, etc.), polymers, vinyls, aminoplasts, acrylic, plastics and adhesives, polyesters, phenols, PU foams and adhesives, one-two-three component epoxy resins, one and two component polyurethanes used in industry.
They are ideal for highly efficient and economical removal of a wide range of coatings, but they are also designed for two-component systems, composite systems, thermosetting systems and even systems with UV polymerization !!!
Thanks to their wettability, their optimal evaporation rate and high KB index, they have a much greater removal capacity than most traditional nail polish removers.
They significantly improve safety conditions, economic conditions due to low evaporation loss and working conditions due to very easy application.
| Products | Flash point | Melting power | Replaces |
| STRIPPER 100 | 41°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics |
| STRIPPER 200 | 23°C | + + + | Dichloromethane, chlorinated thinners, ketones and aromatics |
| STRIPPER 300 | 32°C | + + + + | Dichloromethane, acetone, alcohols, benzenes, xylenes, MEK and alcohols |
| STRIPPER 400 | 30°C | + + + | Dichloromethane, chlorinated diluents, acetones and aromatics |
| STRIPPER 500 | 61°C | + + + | Toluene, diluents, acetones, benzenes, xylenes, MEK |
| STRIPPER 600 | 92°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics |
| PUSOLV | 88°C | + + + + + | NMP, NEP, Toluene, Acetone, Gasoline, Xylenes, Dichloromethane, chlorinated thinners, ketones and aromatics |
IMPASOL STRIPPER 100
The strongest stripper
| Packaging | 5, 30 and 200 l |
IMPASOL® STRIPPER 100 is specifically formulated for extreme removal of paints, varnishes and polymers, with extended effectiveness on resins, alkyds, polyesters and polyurethanes. It is ideal for highly effective and economical removal of a wide variety of coatings, but also for two-component systems, heat curable systems and even UV polymerized systems!
Especially for the removal of acrylic resins, alkyds, alkyd-urethanes, vinyls, aminoplasts, acrylics, polyesters, single and two-component epoxy resins, single and two-component polyurethanes used in industry, where it significantly improves economic (low evaporation losses), working (very easy application) and safety conditions.
It has a much greater hiding power than most traditional degreasers, due to its SMARTness, its optimum evaporation rate and its easy application without hazardous factors. Its use avoids toxic, carcinogenic and extremely flammable
diluents.
We guarantee no methylene chloride, which is classified as CARCINOGENIC R 40.
VOC (carbon footprint) only 74%.
IMPASOL STRIPPER 200
Safe stripper
| Packaging | 5, 30 and 200 l |
IMPASOL STRIPPER 200 is a safe remover, designed especially for diluting, cleaning and removing paints, varnishes, resins and adhesives based on epoxies, urethane-alkyds, acrylics, polyesters and alkyds.
It is ideal for efficient and economical removal of a wide range of coatings, including graffiti, but also asphalt emulsions. Thanks to its wettability and its optimal evaporation rate, it has a greater covering and penetrating ability than most traditional nail polish removers.
IMPASOL STRIPPER 300
Strong and economical stripper
| Packaging | 5, 30 and 200 l |
IMPASOL STRIPPER 300 is a strong and fast remover designed for diluting, cleaning and removing paints, varnishes, polymers and adhesives based on one and two-component epoxy resins, epoxy-urethanes, phenols, one-component polyurethanes, PU epoxies and polyesters.
Ideal OLD PAINT REMOVER. Designed specifically for cleaning brushes, rollers, tools, applicators and for dipping, spraying and cleaning stainless steel rollers, gravure printing and roller feeders.
It has a much greater hiding power than most traditional degreasers, due to its SMOKING and penetrating power, its optimum evaporation rate and its ease of application without hazardous factors. Its use avoids toxic, carcinogenic and extremely flammable thinners.
IMPASOL STRIPPER 400
Fast stripper
| Packaging | 5, 30 and 200 l |
IMPASOL STRIPPER 400 is a FAST remover of paints, varnishes, inks and adhesives used in production.
It significantly improves safety conditions. It is ideal for universal removal of resins on any base and products made from them (paints, inks, adhesives and products).
Specifically for the removal of alkyd,vinyl and urethane resins, epoxy-urethanes, polyesters, phenolics, one and two component epoxy resins, one component polyurethanes used in industry where it greatly improves economic (low evaporation losses), working (very easy application) and safety conditions.
IMPASOL STRIPPER 500
Absolutely safe remover of paint and varnishes
| Packaning | 5, 30 and 200 l |
IMPASOL STRIPPER 500 is an absolutely safe non-flammable remover designed for safe removal of old paints, varnishes and adhesives based on acrylic resins, alkyds, alkyd-urethanes, vinyls, aminoplasts, acrylics, polyesters, one and two-component epoxy resins and polyurethanes used in the automotive industry.
Ideal for dipping, machine applications and works great in an ultrasonic washer up to 40 ° C. Thanks to its safety and non-flammability, it significantly improves safety conditions.
It has no CLP symbol!
Very low VOC (carbon footprint) – only 50%
IMPASOL STRIPPER 600
Absolutely safe remover of paint and varnishes
| Packaning | 5, 30 and 200 l |
IMPASOL STRIPPER 600 is a new generation solvent based on aprotic dipolar. It is a high-performance and extra strong non-flammable remover of one-component and two-component polyurethanes (PUR, PUD, PU and PIR), acrylic resins, alkyds, vinyls, alkyd-urethanes, aminoplasts, acrylics, polyesters, PVA polyvinyl acetates, PVC suspensions in plasticizer and bitumen (resins) – plastisol and one and two component epoxy resins.
Immediate excellent replacement of NMP and NEP pyrrolidones, DMF and DMAc. Ideal for cleaning molds or tools from polyurethane foam, polymers, polyesters or epoxy resins. The product is neutral, it is not necessary to neutralize it, not even from aluminum.
Ideal for dipping, machine applications and works great in an ultrasonic washer up to 60 ° C. Thanks to its safety and non-flammability, it significantly improves safety conditions.
VOC (carbon footprint) is only 39%, it is an ideal product for use in the automotive industry.
IMPASOL PUSOLV
Remover and cleaner of polyurethane, polyol and isocyanate foams and components (polymers), non – flammable, non – carcinogenic
Packaging 5, 30 and 200 l
IMPASOL® PUsolv is developed as an environmentally friendly, safe and non-flammable product for the removal of POLYURETHANE, POLYOL AND ISOcyanate soft and hard foams or polymers.
Specifically for the removal of uncured and cured single, two and three component polyurethanes (PUR, PUD, PU and PIR), polyols and isocyanates.
IMPASOL® PUsolv is neutral and does not need to be neutralised, even from aluminium. It provides highly effective and economical removal of a wide range of PUR compounds, including use in ultrasonic washers up to 60°C.
IMPASOL® PUsolv significantly improves economic conditions due to low evaporation loss, working conditions due to very easy application and also safety conditions due to the safety and non-flammability of the product. IMPASOL® PUsolv is not classified as a carcinogenic, mutagenic or reprotoxic substance. Its fumes are not harmful and odourless, ideal for confined spaces. IMPASOL® PUsolv has no ecological footprint and a minimal carbon footprint.